With a high percentage of APIs sensitive to moisture, the moisture-barrier characteristic of pharmaceutical packaging is gaining greater prominence.
Water Vapor Transmission Rate (WVTR) is the rate at which water vapor will permeate through solid material over a specific period of time.
W301 WVTR is based on the test principle of the gravimetric method (weight loss), and is developed, designed, and manufactured in accordance with GB/T 1037, ASTM E96 and other standards.
The W303 WVTR tester is designed and produced based on the test principle of weight method (weight reduction) and as per the standards of GB/T 1037 and ASTM E96, etc.
W401 2.0 Water Vapor Transmission Rate Tester is designed and manufactured according to GB/T 26253 standard, based on the test principle of infrared moisture analysis sensor,...
W413 2.0 Infrared Water Vapor Transmission Rate Tester is a high-end precision packaging material testing instrument based on ASTM and GB standard requirements and market demand.
Oxygen transmission rate (OTR) is the rate at which oxygen molecules traverse through a solid material over a given time period.
This product is based on the testing principle of the coulometric sensor method testing Oxygen and is designed and manufactured with reference to GB/T 19789, ASTM D3985 and other standards.
Y310 Oxygen Permeability Analyzer is designed and manufactured based on the coulometric sensor method and conforms to GB/T 19789,...
The coefficient of friction (COF) tester is designed to measure the static and kinetic coefficients of friction of plastic film, sheeting, and similar materials.
This instrument can test the coefficient of friction of plastic film, thin sheet, paper and so on. It is applied to quality inspection organizations, drug control institutions...
This instrument can test the coefficient of friction of plastic film, thin sheet, paper and so on. It is applied to quality inspection organizations, drug control institutions, research institutes...
This instrument can test the coefficient of friction of plastic film, thin sheet, paper and so on. It is applied to quality inspection organizations, drug control institutions, research institutes...
It is to test the filtering efficiency of particulate protective masks and medical masks and to determine the resistance of ordinary fabrics and medical protective masks to the constant flow of airflow.
Item | Specification |
---|---|
Test range | 0-99.999% |
Flowmeter range | (10-100)L/min,) |
Sampling frequency | 1-9999/min |
Particle concentration | (0.001-200)mg/m3) |
Counting median diameter | Salt particles(0.075±0.02)μm、Oil particles (0.185±0.02)μm |
Geometric standard deviation of particle size distribution | Salt particles≤1.86、Oil particles≤1.60 |
Dynamic detection range | 0.001-100 mg/m3,accuracy1% |
Dimension | 460mm×525mm×1430mm |
Power supply | AC 220V,50Hz |
Differential pressure sensor range | 0~500Pa |
ARG PACKAGING SOLUTIONS © All Rights Reserved. Developed by SDAD TECHNOLOGY